Filter
Top Products
19
Chapter 2
Basic Operations
How to Use the Pause Feature
(For Analog PBX Line/Long Distance Service Users)
We recommend you press if a pause is required for dialling with a PBX or to access a long
distance service.
Ex: Line access number (PBX)
➡➡
Phone number
•Pressing once creates a pause.
This prevents misdialling when you redial or dial a stored number.
•Pressing more than once increases the length of the pause between numbers.
RDL
RDL
RDL
9
9
RDL
Special Features
1 Press then .
2 Press .
3 Enter the base unit password (p. 23).
•The factory preset is 0000.
4 Press .
•The current timing is displayed.
1: 3 seconds 2: 5 seconds
3
3
INT
PROG
5 To select 5 seconds, press .
OR
To select 3 seconds, press .
6 Press .
•A confirmation tone sounds and the
display will return to the stand-by mode.
PROG
1
2
Setting the pause timing
You can set the pause timing to 3 seconds or 5 seconds, depending on your PBX requirements. The
factory preset is 3 seconds.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
•If 5 beeps sound in step 3, the entered
password is incorrect. Enter the correct
password.
Ex. 3 seconds is selected.
33u i
KX-TCD951EB(016~021) 99.7.7 10:16 AM Page 19