Filter
Top Products
58
Base Unit Settings
Automatic Route Selection
Automatic Route Selection is a feature which selects the least expensive carrier
(network) service available, when making long distance calls.
When area code(s) have been related to carrier code, you will need only dial the area
code, the lower costing carrier (network) will automatically be dialled.
Please contact your telephone company regarding the carrier telephone charges.
Storing the Carrier Code
Firstly you must subscribe to a second carrier (network) service. Then store the code as
follows:
• To turn the feature off, select “Off” in step 7.
Storing the Area Code(s)/Country Code(s)
Store the area code(s) for which the chosen carrier (network) service charge rates are
higher than the original carrier (network) service. Up to 25 area codes can be stored.
If you do not store any area codes, all phone numbers will be dialled with the second
carrier code.
Follow steps 1 to 4 on page 56, then:
5
Select “Set ARS”.
6
Select “Set
Carrier”.
7
Select “On”.
8
Enter Carrier Code.
(max. 7 digits)
9
Press JOYSTICK.
Follow steps 1 to 4 on page 56, then:
5
Select “Set ARS”.
6
Select “Set Area
Code”.
7
Select the desired
Area Code Number
(1-25).
8
Enter Area Code.
(max. 5 digits)
9
Press JOYSTICK.
505NL_e.book Page 58 Thursday, July 10, 2003 4:56 PM