Filter
Top Products
36
SMS Feature (Text Message)
Reading/Displaying Messages in the Incoming List
To exit the operation, press at any time.
• If there is a “ ” icon placed against the time, this means the message has been read
or displayed previously.
• If the list is accessed and no messages have been received, “Receive List
Memory Empty” is displayed.
• If the base unit does not have sufficient memory to receive a message, the display will
show “SMS lists are memory full. Delete messages.”.
• Certain SMS service providers may attach a 1-digit number to the sender’s phone
number. If so, the name will not be displayed even if the name and number have been
stored in the phonebook.
1
Press JOYSTICK (or move).
2
Select “ SMS”.
3
Select “Receive List”.
4
Move the JOYSTICK down.
•
The most recent sender’s details are
displayed.
•
If the name and number have been
stored in the phonebook, the name is
also displayed.
•
You can delete a message by
pressing then selecting “
Yes
”.
5
Select the desired message.
6
Scroll through the message to read/
display.
Go to step 7 on page 37 and 38.
New 2
Total 10
17.8 14:59
JOHN SMITH
0123456789
Time Received
Date Received
Name
Tel. No.
505NL_e.book Page 36 Thursday, July 10, 2003 4:56 PM