Filter
Top Products
44
Base Unit Settings
Selecting the Recall Time
You can change the duration of the recall time depending on the requirements of your
telephone company or PBX.
• The factory preset is “Type 2” (600 ms).
Selecting the Pause Time
You can select the pause time to 3 or 5 seconds, depending on your PBX requirements.
• The factory preset is “Short”.
Setting the Emergency Calls
With the handset in Call Bar Mode, you can still make an emergency call.
• The factory preset is 111, 911 and 999.
NOTE: The factory preset Emergency Call numbers are stored in the first 3
“Emergency Call” locations, it is recommended that you do not overwrite
these numbers.
Follow steps 1 to 4 of Call Options on the previous page, then:
5
Select “Recall”.
6
Select “Type 1” (100 ms), “Type 2” (600 ms) or
“Type 3” (200 ms).
Follow steps 1 to 4 of Call Options on the previous page, then:
5
Select “Pause Time”.
6
Select “Short” (3 sec.) or “Long” (5 sec.).
Follow steps 1 to 4 of Call Options on the previous page, then:
5
Select “Emergency Call”.
6
Select “Emergency Call1” to
“Emergency Call5”.
7
Enter Emergency Call Number.
8
Press JOYSTICK.
500NZ_e_04.fm Page 44 Thursday, July 10, 2003 4:53 PM