Filter
Top Products
37
Cordless Telephone
Handset Settings
Setting the Handset Key Tone ON/OFF
You can turn the key tone ON/OFF.
To exit the operation, press at any time.
• The factory preset is “On”.
Display Options
To exit the operation, press at any time.
Selecting the Standby Mode Display
• The factory preset is “Handset Name”.
1
Press JOYSTICK
(or move).
2
Select “ Setting
Handset”.
3
Select “Tone
Option”.
4
Press JOYSTICK to
select “Key Tone”.
5
Select “On” or “Off”.
1
Press JOYSTICK
(or move).
2
Select “
Display Option”.
Go to step 3.
Follow steps 1 to 2 of Display Options shown above, then:
3
Select “Standby Display”.
4
Select “Base Number”, “Handset
Name” or “Off”.
500NZ_e.book Page 37 Monday, July 7, 2003 4:19 PM