Filter
Top Products
20
Useful Telephone Settings
Guide to base unit
settings
For your reference, a chart of all items which
can be customised for the base unit is
printed below. Details of each item can be
found on the corresponding pages.
*1 If you cancel a handset, the base unit will
“forget” the handset registration.
Base unit settings
Changing base unit PIN (Personal
Identification Number)
The base unit’s default PIN is “0000”.
Important:
L If you change the PIN, please write down
your new PIN as the unit will not reveal the
PIN to you. If you forget your PIN, consult
your nearest Panasonic service centre.
1 Press {j}.
2 Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3 Press {5}.
4 Enter the current 4-digit base unit PIN.
5 Enter the new 4-digit base unit PIN.
6 Enter the new 4-digit base unit PIN again.
7 Press {ih}.
Adjusting ringer volume
4 levels (high/medium/low/off) are available.
1 Press {j}.
2 Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3 Press {2} 2 times.
4 Select the desired setting by pressing {1}
for low, {2} for medium, {3} for high or
{0} for off.
5 Press {>}, then press {ih}.
Setting flash time
Change the flash time if necessary to suit
your PBX or service provider. For further
information, consult your nearest Panasonic
service centre.
1 Press {j}.
2 Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3 Press {3}.
4 Enter “0000” (default base unit PIN).
L If you changed PIN, enter it (page 20).
5 Press {2}.
6 Press {1} .
Code
No.
Feature
(Default setting)
Page
{0} Reset base unit page
22
{1} Set all or selected
handsets to ring (All
handsets ring)
page
25
{2} Base unit ringer
volume (Medium)
page
20
{3} Flash time (600 ms) page
20
Pause length (3
seconds)
page
21
{5} Change base unit
PIN (“0000”)
page
20
{6} Call restriction page
21
Emergency number
(“111”, “911” and
“999”)
page
22
{7} Cancel a handset
*1
page
24
{*} Time and date page 8
TCD430NZ(E).book Page 20 Tuesday, February 3, 2004 2:02 PM