Filter
Top Products
19
Useful Telephone Settings
4 Press {v} repeatedly to display the
desired item, then press {>}.
5 Press {v} repeatedly to select the
desired setting from “RING TYPE 1” to
“RING TYPE 20”, then press {>}.
6 Press {ih}.
Note:
L If you select one of the melody ringer
types, the ringer will continue to sound for
several seconds if the caller hangs up
before you answer. You may hear a dial
tone or no one on the line when you
answer a call.
Tone options
You can turn the following tones and alarms
on or off.
“KEY TONE”: Tones heard when keys are
pressed. Includes confirmation tones and
error tones.
“CALL WAITING”: Tones heard when an
outside call is received while on an intercom
call.
“RANGE ALARM”: An alarm heard when you
move out of range of a base unit during a
conversation.
“BATTERY LOW”: An alarm heard when the
batteries need to be charged.
1 Press {j}.
2 Press {v} repeatedly to display
“SETTING HS”, then press {>}.
3 Press {v} repeatedly to display “TONE
OPT”, then press {>}.
4 Press {v} repeatedly to display the
desired item, then press {>}.
5 Press {v} repeatedly to select “ON” or
“OFF”, then press {>}.
6 Press {ih}.
Display options
Selecting the standby mode display
“CLOCK”: The time and date will be
displayed. Set the time and date beforehand
(page 10).
“OFF”: Turns this feature off.
“BS NO”: The base unit number will be
displayed.
“HS NO”: The handset number will be
displayed.
1 Press {j}.
2 Press {v} repeatedly to display
“SETTING HS”, then press {>}.
3 Press {v} repeatedly to display
“DISPLAY OPT”, then press {>}.
4 Press {v} repeatedly to display
“STANDBY MODE”, then press {>}.
5 Press {v} repeatedly to select the
desired setting, then press {>}.
6 Press {ih}.
Note:
L If you subscribe to a Caller ID service, the
display will show the number of new calls
even if “CLOCK” has been selected (page
15).
L If “BS NO” is selected, the base unit
number will be displayed.
Example:
L If “HS NO” is selected, the handset
number will be displayed.
Example:
Selecting the talk mode display
“TALK TIME”: The length of the current call
will be displayed.
“PHONE NO”: The phone number will be
displayed.
1 Press {j}.
TCD430AL(E).book Page 19 Tuesday, March 30, 2004 5:27 PM