Filter
Top Products
11
Telephone
Telephone
Making calls
1 Lift the handset and dial the phone
number.
L To correct a digit, press {C}, then enter
the correct number.
2 Press {C}.
3 When finished talking, press {ih} or
place the handset on the base unit.
To adjust the receiver volume
You can select the desired receiver volume
from level 1 to 3.
While talking, press {e} or {v}.
Redial feature
To redial the last number dialled
Press {C}, then press {R}.
To make a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list.
1 Press {R}.
L The last number dialled will be
displayed.
2 Press {v} repeatedly to select the
number.
L To exit the list, press {ih}.
3 Press {C}.
To edit a number in the redial list before
calling it
1 Press {R}.
2 Press {v} repeatedly to select the
number, then press {>}.
3 Press {v} repeatedly to display “EDIT
CALL NO”, then press {>}.
L The first digit of the number will flash.
4 Press {<} or {>} to move the cursor to
the right of where you want to edit the
number.
5 Edit the number.
L To erase a digit, press {C}.
6 Press {C}.
To erase numbers in the redial list
1 Press {R}.
2 Press {v} repeatedly to select the
number, then press {>}.
3 Press {v} repeatedly to display
“CLEAR”, then press {>}.
L If you want to erase all numbers in the
list, select “ALL CLEAR”.
4 Press {v} repeatedly to display “YES”,
then press {>}.
L To erase other numbers, repeat from
step 2.
5 Press {ih}.
To store a number from the redial list into
the phonebook
1 Press {R}.
2 Press {v} repeatedly to select the
number, then press {>}.
3 Press {v} repeatedly to display “SAVE
TEL NO”, then press {>}.
4 Press {j}.
5 Enter the name (9 characters max.; see
the character table on page 13).
6 Press {j}.
Other features
Key lock
The dial keys can be locked so that no calls
can be made. Only incoming calls will be
accepted while key lock is on.
To turn on key lock, press {j} for about 2
seconds.
L A beep will sound and the following will be
TCD430AL(E).book Page 11 Tuesday, March 30, 2004 5:27 PM