Filter
Top Products
Installing the KX-NT303/KX-NT305
16
Installing the KX-NT303/KX-NT305
KX-NT303 (For KX-NT343/KX-NT346)
1.
Open the cover.
2. Attach the KX-NT303 to your
unit with the screws
(included).
3. Plug the flat cable into the
connector (A), then bend the
cable slightly as shown (B).
4. Close the cover.
The KX-NT303/KX-NT305 allow 12/60
additional flexible CO buttons to be added to
this unit. These buttons are used to seize an
outside line, make a call using One-touch
Dialling, or perform a feature that has been
assigned to the key.
<with a KX-NT346>
CAUTION:
Before you install or uninstall the Add-on Key Module, turn off the
unit by disconnecting the AC adaptor (if connected) and the
Ethernet cable connected to the switching hub.
NT300UK_QRG.fm Page 16 Wednesday, May 30, 2007 1:31 AM