Filter
Top Products
Connection
10 Document Version 2008-05
Connection
PC connection
• Use a straight CAT 5 (or higher) Ethernet cable (not included) that is 6.5
mm (1/4 in) in diameter or less.
• For further information on the connection to a PC, refer to the
documentation provided for the PBX.
Switching Hub connection
• Use a straight CAT 5 (or higher) Ethernet cable (not included) that is 6.5
mm (1/4 in) in diameter or less.
AC adaptor
• Use a Panasonic AC adaptor KX-A239 (PQLV206).
• The AC adaptor is used as the main disconnect device. Ensure that the
AC outlet is located near the unit and is easily accessible.
CAUTION:
To a PC.
To a Switching Hub.
Optional AC adaptor
(not included).
<Back view>
Clamp
AC adaptor
Headset
Recommended: KX-TCA86, KX-TCA92
Do not use a KX-T7090 headset.
For extra orders for the accessories, call toll-free: 1-800-332-5368
When connecting cables
• Ensure that the Ethernet cables and the AC adaptor cord are
clamped to prevent damage to the connectors.
• Cables may be routed either upwards or downwards by using
the appropriate cable clamp located on the back of the unit.
When connecting a headset and AC adaptor
• Ensure that the headset cord and the AC adaptor cord are
wound around the hook to prevent damage to the connectors.
NT321M_QRG.fm Page 10 Tuesday, January 15, 2008 4:51 PM