Filter
Top Products
Programming
For assistance, please visit http://www.panasonic.com/phonehelp 39
Programmable settings
You can customize the unit by programming the following features using the handset. To
access the features, there are 2 methods:
– scrolling through the display menus (page 39)
– using the direct commands (page 44)
L Mainly the direct command method is used in these operating instructions.
L To change the base unit ringer volume and tone, see page 26.
Programming by scrolling through the display menus
1 {MENU} (middle soft key)
2 Press {^}, {V}, {<}, or {>} to select the desired menu. i {SELECT}
L If there are sub-menu(s), press {^} or {V} to select the desired item. i {SELECT}
Example: To access the handset ringer volume setting
Press {^}, {V}, {<}, or {>} to select (. i {SELECT}
Then press {^} or {V} to select “Ringer volume”. i {SELECT}
3 Press {^} or {V} to select the desired setting.
L This step may vary depending on the feature being programmed.
4 {SAVE} i {OFF}
TG5771_5776_5777.book Page 39 Thursday, April 13, 2006 4:14 PM