Filter
Top Products
Programming
For assistance, please visit http://www.panasonic.com/phonehelp 33
*1 If you program these settings using one of the handsets, you do not need to program
the same item using another handset (KX-TG5672/KX-TG5673).
*2 KX-TG5672/KX-TG5673
Programming using the direct commands
Initial setting Set answering Ring count
*1
page 41
Recording time
*1
page 42
Remote code
*1
page 41
Message alert – page 42
LCD contrast ––
Key tone ––
Auto talk – page 20
Caller ID edit ––
Time adjustment
*1
––
Set tel line Set dial mode
*1
page 18
Set flash time
*1
–
Set line mode
*1
–
Set base unit Talking CallerID
*1
–
Registration – page 46
Change language – page 18
1 {MENU}
2 Enter the desired feature code.
3 Enter the desired setting code.
L This step may vary depending on the
feature being programmed.
4 {Save} i {OFF}
Note:
L In the following table:
– < > shows the default setting.
– If “System setting” column is checked,
you do not need to program the same
item using another handset (KX-
TG5672/KX-TG5673).
L If you make a mistake or enter the wrong
code, press {OFF}, then start again by
pressing {MENU}.
Main menu Sub-menu 1 Sub-menu 2 Page
TG5671_72_73(e).book Page 33 Wednesday, January 11, 2006 7:03 PM