Panasonic KX-TG5633 Answering Machine User Manual


 
Caller ID Service
30 For assistance, please visit http://www.panasonic.com/phonehelp
L Usually the unit announces the caller’s
name after the 2nd ring. If you turn on
the answering system and set the ring
count to “2” (page 42), the unit does not
announce the caller’s name. If “Toll
saver” is selected and there is a new
message, the unit does not announce
the caller’s name.
L When you receive a call while on the
phone, the 2nd caller’s name is not
announced even if you subscribe to both
Caller ID and Call Waiting with Caller ID
services.
L This feature can be turned on or off
(page 36).
Ringer ID
This feature can help you identify who is
calling by using different ringers for
different callers stored in the phonebook.
You can assign a different ringer to each
phonebook item. When a call is received
from a caller stored in the phonebook, the
ringer is used after Caller ID information is
displayed.
If you select “No Ringer ID”, the
handset uses the ringer tone you selected
on page 36 when a call is received from
that caller. The default setting is “No
Ringer ID”.
1 Find the desired item (page 26, 27). i
{Option}
2 Ringer IDi {Select}
3 Select the desired ringer tone.
4 {Save} i {OFF}
Light-up ID
This feature can help you identify who is
calling by using different ringer indicator
colors for different callers stored in the
handset phonebook. You can assign a
different indicator color to each handset
phonebook item. When a call is received
from a caller stored in the handset
phonebook, the indicator color is used
after Caller ID information is displayed.
If you select “No Light-up ID”, the
handset uses the ringer indicator color you
selected on page 36 when a call is
received from that caller.
The default setting is “No Light-up ID”.
1 Find the desired item (page 26, 27). i
{Option}
2 Light-up IDi {Select}
3 Select the desired ringer indicator color.
4 {Save} i {OFF}
TG563X_565X.book Page 30 Friday, February 3, 2006 4:59 PM