Filter
Top Products
Answering System
Preparation
69
For assistance, please call: 1-800-211-PANA(7262)
Telephone System Useful Information
Canceling Registration/Re-registration
• “[-]” is shown on the top right of the display.
• After canceling registration, the handset cannot be used. If you want to use it
again, register the handset to the base unit by performing steps 5 and 6 on
page 70.
Re-registering the Handset
If you want to re-register the han
dset to the base unit or a different base unit of the
same model, you need to register it to that base unit. The handset will be given a new
extension number of that base unit. Only one handset can be registered at a time near
the base unit.
Make sure the base unit and the other handsets are not being
used. Have both the handse t and base unit nearby during registration.
4 Scroll to “Deregistration” by pressing
[d] or [B], then press the soft key ( ).
5 Press [3][3][5] to delete the registration
memory.
• If you enter a wrong code, re-enter [3][3][5].
6 Press the soft key ( ).
• The registration memory will be erased on both
the handset and the base unit.
• If the handset beeps 3 times, you entered a
wrong code.
Enter “335”, then press the soft key ( ).
• To register the handset to another base unit of
the same model, start from step 5 on page 70.
If you have canceled handset registration at a previous base unit (p. 68), start
from step 5 on page 70.
1 Handset: Press [MENU].
2 Handset: Scroll to “Initial setting” by
pressing [d] or [B], then press the soft key
().
3 Handset: Scroll to “Registration” by
pressing [d] or [B], then press the soft key
().
4 Handset: Press the soft key ( ) at “HS
registration”.
SELECT
Deregistration
Deregistration
Enter code:335
:335
OK
OK
SP
I
PRIVACY
1
Handset [2]
Deregistered
IN USE
[
-
]
Ex. Extension number 2
Handset & Base Unit
SELECT
Initial setting
SELECT
Registration
SELECT
HS registration