Filter
Top Products
Programmable Settings
40 For assistance, please call 1-800-211-PANA (7262).
Programming via direct commands
You can also program most features using “direct commands”—special codes that take
you directly to the feature you wish to program and allow you to select the desired setting.
There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1 Press {MENU}.
2 Enter the desired feature code (shown below).
3 Enter the desired setting code (shown below).
LThis step may vary depending on the feature being programmed.
4 Press {Save}.
5 Press {OFF} to exit programming mode.
Direct commands chart
Feature Feature code Setting code Page
Ringer volume {1} {1}{1}: Low {2}: Medium
{3}: High {0}: Off
page 34
Ringer tone {1} {2}{1}–{3}: Tone pattern 1–3
{4}–{7}: Melody pattern 1–4
page 35
Interrupt tone {1} {3}{1}: On {2}: 2 times {0}: Off page 35
Message play {2} – page 45
Date and time {4} Go to step 3 on page 16. page 16
Voice enhancer {5}{1}: On {0}: Off page 36
Copy phonebook
(1 item)
*1
{#} {1} Go to step 4 on page 24. page 24
Copy phonebook
(all items)
*1
{#} {2} – page 25
LCD contrast {0} {1}{1}–{6}: Level 1–6 page 37
Key tone {0} {2}{1}: On {0}: Off page 38
Auto talk {0} {3}{1}: On {0}: Off page 36
Caller ID number auto
edit
{0} {4}{1}: On {0}: Off page 36
Set dial mode {0} {5} {1}{1}: Pulse {2}: Tone page 37
Set flash time {0} {5} {2}{1}: 700 ms {2}: 600 ms
{3}: 400 ms {4}: 300 ms
{5}: 250 ms {6}: 110 ms
{7}: 100 ms {8}: 90 ms
page 37
TG2431_2432(e).book Page 40 Thursday, February 3, 2005 5:01 PM