Filter
Top Products
Preparation
10 For assistance, please call 1-800-211-PANA (7262).
Note:
LUse only the included Panasonic AC
adaptor PQLV19.
LThe AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
LThe AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
LThe unit will not work during a power
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same telephone
jack using the Panasonic KX-J66 T-
adaptor. Emergency power can be
supplied to the unit by connecting a
Panasonic battery back-up power
supply noted on page 5.
If you subscribe to an xDSL service
LPlease attach a noise filter (contact your
xDSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 26) do not
function properly.
Battery installation
1 Insert the battery (1), and press it
down until it snaps into the
compartment (2).
2 Close the handset cover.
Telephone
line cord
Noise filter
(For xDSL users)
To single-line
telephone
jack (RJ11C)
1
2
TG2431_2432(e).book Page 10 Thursday, February 3, 2005 5:01 PM