Panasonic KX-TC1230NZW, KX-TC1230ALW Telephone User Manual


 
13
Preparation
Settings
Connections
USE ONLY WITH Panasonic AC ADAPTOR PQLV10AL.
The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
To connect a standard telephone on the same line, see page 75.
If your unit is connected to a PBX which does not support Caller ID services, you
cannot access those services.
When more than one unit is used, the units may interfere with each other.
To
prevent or reduce interference, please leave ample space between the base units.
KX-TC1230NZW will not answer incoming calls on your FaxAbility number.
Extend the
antenna fully.
Hook
Fasten the cord to prevent
it from disconnecting.
To Power Outlet
(AC 230 V240 V, 50 Hz60 Hz)
AC Adaptor
Telephone Line Cord
Telephone
Plug
For New Zealand
To Single-Line
Telephone Jack
Telephone Line Cord
To Socket
For Australia