Filter
Top Products
again either when the phone is idle or during an active call.
To switch between a wired headset and wireless headset:
1 Double-press the (Headset) key to open the 3. Bluetooth Setup dialog box.
2 Press the Left/Right navigation key to select the Use BT Headset item.
3 Press the Enter key to toggle this option on or off.
A check mark indicates that the wireless headset is used. Clear the check mark to use a wired
headset. On (o) by default.
To unpair a Bluetooth wireless technology headset:
1 Double-press the (Headset) key to open the 3. Bluetooth Setup dialog box.
2 Press the Right navigation key to select the Paired: item.
3 Choose one of the following:
• If your headset is displayed in the Paired combo box, proceed to step 5.
• If more than one device is paired, and your headset is not already displayed in the Paired
combo box, do the following:
a Press the Right navigation key to select the Paired: combo box. Press the Enter key to
open edit mode.
b Press the Up/Down navigation keys to open the list. Press the Up/Down navigations key
to scroll in the list and highlight your headset.
c Press the Enter key to select the headset and close the combo box. Press the Enter key to
exit edit mode.
4 Press the Right navigation key to select the UnPair button (next to the UnPair Device item).
5 Press the Enter key.
Your wireless headset is unpaired and removed from the Paired: item's list.