Filter
Top Products
14
6.3 To dial a number from the Phone Book:
1. With the required telephone number showing on the display, press CALL
BACK button. The telephone dials out the displayed telephone number
automatically in speakerphone mode.
2. The display shows the telephone number and call timer.
OR
1. Pick up the handset or press SPEAKER button (the speaker light will
turn on) and wait for a dial tone.
2. Press and release
CID
button, symbol is shown.
3. Review the stored phone number by pressing or .
4. Press CALL BACK button.
6.4 Recording / Editing / Deleting voice prompt of name of phone
book
With caller ID service activated, when an incoming call is received, the unit
will display and announce the caller's phone number (unless it is blocked). If
the caller's phone number is stored in the phone book, caller's name will be
displayed too.
If the voice prompt is recorded for this phone number, the unit will announce
the voice prompt instead of the caller's phone number.
1. Press and release the MENU button until the NAME RECORDING is
shown.
2. Press the CALL BACK button. A list of the phone book entries will be
displayed.
3. Press or to select the list you like to record a voice or name for it.
4. To record or edit the voice, hold down CALL BACK button. After the
beep, speak clearly into the microphone. Release the button when you
are finished (max recording time is 3 seconds.) The new voice prompt
will then be replayed automatically.
To delete the voice prompt recorded, press DELETE button while the
voice prompt is playing.
5. Repeat steps 3 to 4 to edit or delete entries or exit the set-up mode by
pressing the
CID
button.