Oricom TP150 Telephone User Manual


 
12
6. Select EMERGENCY ON or EMERGENCY OFF using the or and
confirm with CALL BACK button.
If you selected EMERGENCY OFF and press CALL BACK, SAVED
is shown and the unit announces “Name Recording”. That means the
phone number is stored only for normal memory phone dial out, not
for emergency call dial out
To record voice (example ‘John’), hold down CALL BACK button,
speak clearly into the microphone after a beep and “VOICE” symbol
is flashing. Release the button when you finished or the unit will stop
recording after 3 seconds. The voice prompt will then be played
automatically. [Recording the Voice is necessary for the personalized
talking caller id and talking phone book feature].
If you selected EMERGENCY ON, and press CALL BACK,
LOCATION” is shown. Select the required location by pressing or
and confirm with CALL BACK button, if the location is in use, the
display shows OVERWRITE? confirm with CALL BACK or select
another location with or . Press the CALL BACK button and
SAVED! is shown.
WARNING
Selecting the correct location is very important as this feature
determines the sequence in which the emergency telephone numbers
are dialled. Location 1 will be dialled first, then 2, then 3 etc.
WARNING: If you choose to overwrite a location, the previously stored
number will be erased.
The unit announces “Name Recording” and the “SOS” symbol is shown.
That means the phone number is stored for a general phone and
emergency’s call dial out.
To record voice (example ‘this is John’), hold down CALL BACK button,
speak clearly into microphone after a beep and “VOICE” symbol is
flashing. Release the button when you finished or the unit will stop
recording after 3 seconds. The voice prompt will then be played
automatically. [Recording the Voice is necessary for the personalized
talking caller id and talking phone book feature.
7. You can repeat step 2 to 6 to enter more numbers or press
CID
button to
exit.
Important: You can only use the phone book features, in the phone
book mode. If the symbol is off, press
CID
button once to enter phone
book mode.