Oricom Pro900 Telephone User Manual


 
33
Caller ID, Cordless Handset
Caller ID
If you subscribe to your telephone operators service
(charges may apply), numbers of the incoming calls
will be displayed on the screen and stored in the call
log (please consult your telephone service provider for
details).
The number of the caller (or name if stored in the Phone
Book) appears in the display when the phone rings. If the
caller has withheld their phone number, a corresponding
message appears in the display. The phone number is
not displayed and will not be stored in the calls list.
A total of 30 incoming calls, with a maximum of 16
letters for the name and 23 digits for the number can be
stored in the calls list. The fl ashing
indicates new calls
in the calls list.
Take two different calls at the same time
If you have subscribed to your telephone network
operators Call Waiting Caller ID service, your phone
will display the number of the second incoming call for
around 20 seconds while you are talking on the phone.
During a call, you will hear two loud beeps periodically to
notify you of another incoming call. If you wish to answer
this call.
1. When the handset receives a second call, the
number of the caller appears on the display. It will
display for 20 seconds or until you press a key on
the phone.
2. Press [ R> ] to listen for dial tone then Press [ 2 ] to
put the current call on hold and talk with the second
caller.
3. Subsequent presses [ R> ] to listen for dial tone then
Press [ 2 ] will toggle you between these 2 callers.
Displaying calls list entries
Opens the calls list at most recent entry
or Select an entry
To display further information.