Filter
Top Products
23
CORDLESS HANDSET OPERATION
Multi-handset Operation
Your M5200 series phone can have up to 4 handsets registered to the base unit. Each
handset has its own number HS-1, HS-2, HS-3 and HS-4 shown on the left-hand side
of the display. With 2 or more handsets you can:
• Make intercom calls while on an external call
• Switch between an external call and intercom call
• Transfer an external call from one handset to another
• Set a 3-way conference call between yourself, an external call and intercom call
Note:
•
A maximum of 1x external call and 2x intercom calls can take place at the same time.
• If you make an external call + another handset is on line = result in a busy tone.
• You can make an intercom call when the other handset is in progress.
Intercom function
To make an intercom call,
1. Press INT key, during standby mode.
The display on the right is shown.
2. Key the handset number (1, 2, 3, or 4) you wish
to call.
When there is an intercom call, the display on the right is shown.
1. Press or INT key to answer the intercom call.
2. Press or INT key again to end the call.
Depicts Handset-2 calling