Filter
Top Products
4
Installation
Installation
Connecting the telephone
1. Plug one end of the telephone cable supplied into the TEL. LINE jack
at the back of the telephone base.
2. Plug the other end of the telephone cable into the wall outlet.
3. Plug one end of the curly cord into the socket on the handset.
4. Plug the other end of the curly cord into the left side of the telephone.
Wall Mounting
Method A. To fit to an existing telephone wall plate with modular
connector simply,
1. Press and lift out the handset holder
on base. Rotate it 180°, and snap it
into place (see Fig A) so it will hold the
handset in place when the phone is
mounted on the wall.
2. Insert the mounting bracket’s two tabs
into the matching slots on the phone’s
base. (see Fig B)
3. Then press down and slide the bracket
Upward until the tabs snap into place.
4. Plug the short telephone line cord
(supplied) into the base of the phone and
plug the other end into the telephone
wall plate socket.
5. Position the mounting holes on the base of the phone over the two
protruding screws on the wall plate. Gently push the phone flush
against the wall plate then slide the phone downwards locking it into
place.
4 4
4
4
4
Fig A
1
2
3
3
Fig B
Care80 user manual.indd 4 2009-11-5 17:38:00