Filter
Top Products
5
KIM coldstarts
When a coldstart is performed internal autodial numbers are assigned in
ascending order starting on the top left button (button 01) on the KIM.
You can coldstart one KIM on your CAP or all KIMs on your CAP depend-
ing on your preference. A coldstart must be performed during the first ten
seconds after powering up a KIM.
Note:
If you have an enhanced CAP, performing a coldstart on your KIM
can affect line button assignments on your T7316E telephone.
Other documents
Read the Telephone Feature Card for more information on using telephone
features. This card lists all of the available features that can be used on
your CAP.
Read your T7316E Telephone User Card. This card contains information
on all the buttons on your telephone including the Audio cluster buttons
(Handsfree, Mute and Headset).
For both types of coldstarts
1. Unplug the T7316E telephone line cord, then reconnect it to power up.
2.
To coldstart an individual KIM
While the indicators are flashing on the individual
KIM, simultaneously press the top two and the bottom
two buttons on the lower button set of the KIM, as
shown in the illustration.
OR
To coldstart all KIMs
While the indicators are flashing on the first KIM, (next
to the telephone) simultaneously press the top two
buttons and the bottom two buttons on the KIM, as
shown in the illustration.
3. At the beginning of the coldstart, indicators beside
each KIM button will briefly flash starting at the bottom
right button.
4. When the KIM coldstart is completed, the T7316E
telephone display automatically returns to the time
and date.