Filter
Top Products
2
Programming memory buttons
The default for KIM memory buttons is blank. You can program memory
buttons on the KIM to your personal preference with internal and external
autodial numbers or features to give you touch dialing or feature activation.
Tip:
Internal autodial numbers can be automatically assigned to KIM
memory buttons when a coldstart is performed. Refer to the “KIM
coldstarts” section in this guide for more information.
Your CAP will be most effective if you use it along with these features:
• Camp-On (≤°¤)
• Transfer (≤‡‚)
• Priority Call (≤fl·)
Make sure that features are programmed on your T7316E telephone or
KIM by following the steps below for programming memory buttons.
Moving line buttons
If you have an enhanced CAP you can move external lines, target line and
hunt group appearances from the buttons on the T7316E telephone
to buttons on your KIM.
Internal autodial
1. Press ≤•¤.
2. Press a memory button.
3. Dial the extension number.
4. Press
OK
to store the number.
External autodial
1. Press ≤•⁄.
2. Press a memory button.
3. Dial the external number.
4. Press
OK
to store the number.
Features
1. Press ≤
≤≤
≤•
••
•
‹
‹‹
‹.
2. Press a memory button.
3. Press ≤
and enter the feature
code.
4. Press
OK
to store the feature code.
How to erase memory buttons
1. Press ≤•⁄.
2. Press a memory button.
3. Press
OK
to erase the button.
1. Press ≤•°⁄.
2. Press the line button on your T7316E telephone that you want to move.
3. Press the KIM memory button that you want to move the line to.
4. Press ®. The line button now appears on your KIM.