Filter
Top Products
30
C4030 Handset Standard 1.00
Administration
Initial Setup and Subscription
The handset can operate with up to 4 DECT systems. Before making a call
with a DECT system, subscribe the handset to the respective system. A PIN
is required for the subscription process.
Register the handset on the
DECT system:
1. Obtain a PIN from the DECT
management system.
2. Press the
, , and keys.
3. Press the
key to confirm.
4. Confirm the menu selection by
pressing the
key.
5. Enter the PIN and press the
key.
The handset reports that the subscription procedure has successfully com-
pleted. If it fails to report a completed subscription, contact your system
administrator.
The antenna symbol in the upper right corner of the display indicates that the
handset is locked to a DECT system.
After the registration procedure, change the default identification name to a
logical name.
Entering the Identification name
Enter a description for easy
identification of the handset:
1. Press the , , and keys.
2. Press the
key for confirmation.
3. Confirm the menu selection by
pressing the
key.
4. Enter the description of your choice
(maximum of 10 characters) and
press the
key.