Filter
Top Products
Set up the DECT Handset 4060
16
d
OK
OK
8. Choose one of the following:
— if you are at a location where two
DECT systems overlap, use the
keypad to enter the system
identification number at the PARK
prompt and press the OK soft key.
— if you are at a location where there is
only one DECT system, press the
OK soft key.
d
OK
9. Use the keypad to enter the
authentication code at the Auth.Code
prompt and press the OK soft key.
d
OK
10. Use the keypad to enter the system
name at the System Name prompt and
press the OK soft key.
d
OK
11. Use the keypad to enter the local
number at the Local Number prompt
and press the OK soft key.