Filter
Top Products
38
User Option menu
4. Use the Up and Down buttons to scroll
through the menu and highlight one of
the following settings (an asterisk
indicates the selected setting):
• Normal: Produces an audible ring.
This is the default setting.
• Vibrate: Vibrates.
• Vib/Norm: Vibrates for six seconds,
then rings.
5. Press the Select button (or the OK soft
key) to select the setting.
6. Do one of the following:
• Press the Up soft key to return to the
previous menu and set another
option.
• Press the Power Off/End Call key
to exit all menus and return to the
standby state.
Note: You can also press the Exit soft
key from the top-level menu to exit and
return to the active (off-hook) state.
Select Noise Mode
The Noise Mode option enables the user to adjust the handset for different levels of
noise within the working environment.
To select Noise Mode:
1. Press and hold the Function key when
in standby mode.
2. Use the Up and Down buttons to scroll
through the menu and select Noise
Mode.
3. Press the Select button (or the OK soft
key) to select the option. The next menu
level displays.
Up
Noise Mode