Filter
Top Products
96
/ Registering individual portables
MICS-XC Norstar-Companion Installer Guide P0881594 Issue 02
• The five-digit ID of the Base Station radio you want to
measure, by mapping the Base Station location to the TCM
port. The first four digits indicate the TCM port to which
the Base Station is connected. The last digit indicates the
number of the radio on the Base Station. For example, the
number 03142 on the Base Station is connected to TCM
port 0314, and 2 is the radio number. The five-digit
number might be printed on a label attached to the Base
Station mounting bracket.
• The radio IDs of all other Base Stations in the same
location.
1. Follow steps 1 to 5 of “Measuring undirected RSSI’’ on
page 94.
If the display shows the ID of a Base Station neighboring
the one you want to measure, proceed to step 2.
If the display shows the ID of the Base Station you want to
measure, move out of the cell boundary range so that hand-
off occurs and then continue with step 2.
2. Press m. The display shows MENU.
3. Press ,
or
. until the display shows Feature
request.
4. Press SELCT . The display shows A- .
5. Press * 8 9 9.
6. Enter the five-digit ID code for the Base Station radio you
want to measure. The display shows the cell number, the
radio ID of the Base Station to which the portable is linked,
the power mode (high or low), followed by the signal
strength and the channel. For example,
8 15112 H 67 29.