Filter
Top Products
Get started
7
English
■ Pair the headset with a compatible phone
Make sure that the headset is on, and put it in pairing mode by pressing
the answer/end key and the volume up (+) key at the same time over 5
seconds until the blue indicator light lights up. The indicator light remains
on for 5 minutes, during which you can pair the headset with a
compatible mobile phone.
1. Set the phone to search for Bluetooth devices. See the user guide of
your phone for instructions.
2. When your phone finds the headset, confirm the pairing from your
phone.
3. When prompted for the Bluetooth passcode of the headset, enter
0000.
If the pairing was unsuccessful, try to pair the devices again.
You only need to pair the headset with your phone once.
If the pairing was successful, the blue indicator light starts to flash. The
headset is now in the standby mode and ready for use.
9239354_HS-36W_1_en.fm Page 7 Friday, August 19, 2005 6:09 PM