Filter
Top Products
Get started
6
■ Charge the battery
The headset has an internal, nonremovable, rechargeable battery. Do not
attempt to remove the battery from the device, as you may damage the
device.
1. Ensure that the Nokia Charger Adapter cable (CA-71) is connected to
the charger that is supplied with the headset. If this is not the case,
connect the one end of the adapter cable to the charger cable.
2. Connect the adapter cable to the
headset.
3. Connect the ACP-12 charger to a wall
outlet or the LCH-12 charger to the
accessory power outlet of your car.
The blue indicator light is continuously
displayed during charging.
The headset is switched off and cannot be used during charging.
4. When the battery is fully charged, the blue indicator light switches off.
Disconnect the charger from the wall outlet or the accessory power
outlet and the headset. When you disconnect the power cord of the
charger, grasp and pull the plug, not the cord.
The fully charged battery has power for up to 4h to 8h of talk-time or up
to 90h to 130h of standby time. (In the standby mode, the headset is
switched on but no call is in progress.)
However, talk and standby times may vary when used with different
handsets, other Bluetooth enabled-products, battery condition, usage
settings, usage style and environments.
When the battery is running out of power, the red indicator light lights
up. Charge the battery.
■ Switch the headset on or off
To switch on, press the answer/end key for about 1 second. To switch off,
press and hold the answer/end key for about 5 seconds.
9239354_HS-36W_1_en.fm Page 6 Friday, August 19, 2005 6:09 PM