Filter
Top Products
Get started
7
Charging the battery for 15 minutes provides about 4 hours of talk
time or music playing time. Charging the battery fully may take up to
45 minutes.
3. When the battery is fully charged, the green indicator light is
displayed. Disconnect the charger from the headset, then from the
wall outlet.
The fully charged battery has power for up to 9 hours of talk time, up to
90 hours of standby time, or up to 7 hours and 30 minutes of music
playing time.
When the battery is discharged, the headset beeps about every minute,
and the red indicator light flashes slowly.
■ Switch the headset on or off
Switch on
To switch on, press and hold the multifunction key for about 2 seconds.
The headset beeps, and the green indicator light is briefly displayed.
When the headset tries to connect to the last used phone or music
player, the green indicator light flashes slowly. When the headset is
connected to a device and is ready for use, the blue indicator light
flashes slowly. If the headset has not been paired with a device, it
automatically enters the pairing mode (see “Pair the headset with phone
or music player”, p. 7).
Switch off
To switch off, press and hold the multifunction key for about 5 seconds.
The headset beeps, and the red indicator light is briefly displayed. If the
headset is not connected to a device within about 10 minutes, it
switches off automatically.
■ Pair the headset with phone or music player
If your phone supports the A2DP Bluetooth profile and has a music
player feature, you can use the phone to also play music with the
headset.