Filter
Top Products
7
Copyright © 2009 Nokia. All rights reserved.
one device supporting the HFP
profile and another device
supporting the A2DP profile at a
time.
To manually connect the headset to
the last used device that supports
the HFP profile (for example, after
connection loss), switch the headset
off and on, or press and hold the
answer/end key for about 2 seconds.
To manually connect the headset to
a device that supports the A2DP
profile, press the play/pause key.
You may be able to set your device
so that the headset connects to it
automatically. To activate this
feature in a Nokia device, change
the paired device settings in the
Bluetooth menu.
Basic use
Wear the headset
Plug a pair of headphones into the
audio connector (15).
Use the clip to attach the headset to
your clothing. Place the right
headphone cable (indicated with R)
over your shoulders, and gently
insert the earplugs into your ears
(13). Place the headset within about
30 cm (11.81 inches) from your
mouth.
Warning: When you use
the headset, your ability
to hear outside sounds
may be affected. Do not
use the headset where it
can endanger your
safety.