Filter
Top Products
6
Copyright © 2009 Nokia. All rights reserved.
Pair and connect the headset
Before using the headset, you must
pair and connect it with a
compatible device.
If your mobile device supports the
A2DP Bluetooth profile and has a
music player feature, you can use
the device to also play music
through the headset.
If your mobile device does not
support the A2DP profile, you can
separately pair the headset with the
mobile device and a music player
that supports this profile. If you
have paired and connected the
headset with your mobile device,
disconnect the headset from it
before pairing the headset with the
music player.
1. Ensure that your mobile device
or music player is switched on
and the headset is off.
2. Press and hold the power key (for
about 5 seconds) until the blue
indicator light starts to flash
quickly.
3. Within about 3 minutes, activate
the Bluetooth feature on your
device, and set it to search for
Bluetooth devices.
4. Select the headset from the list
of found devices.
5. If necessary, enter the passcode
0000 to pair and connect the
headset to your device. If your
device does not have a keypad, it
may use this passcode by default.
In some devices, you may need to
make the connection separately
after pairing.
When the headset is connected to
your device and is ready for use, the
blue indicator light flashes slowly.
You can pair the headset with up to
eight devices but connect it to only