NEC Single Line Telephone Telephone User Manual


 
Placing Calls Quickly If your call doesn’t go through…
An Intercom Number can also be stored to LND. (System setting is necessary. Ask your Supplier.)
Last Number Dialling <for Outside / Intercom>
#
Set / Answer a Message Waiting
When you set a MW, the called party’s Indicator starts to flash.
When you answer a MW, the Indicator shall automatically be off when the called party answers.
4 18
8 4 1
Answe
r
Set
Your phone’s
Indicator is
flashing
(
Hear Bus
y
Tone or No Answer
)
If your call doesn’t go through…
Set Camp On / Callback
(Hear Busy Tone
or No Answer)
Wait for the
system to call
you back
Wait without
hanging up
5
<Cam
p
On>
<Callback>
08
<Camp On> In case of Intercom Call, when you hear ringing, wait for the called party to answer.
In case of Outside Call, when you hear Dial Tone, begin telephone number dialling.
<Callback> In case of Intercom Call, when your phone starts the ringing, lift handset and wait for the
called party to answer.
In case of Outside Call, when your phone starts the ringing, lift handset, hear Dial Tone, and
begin telephone number dialling.
This function is applicable in case all trunks are busy condition. (not applicable for dialled outside party
bus
y)
Cancel Message Waiting (Cancel Individually - at originated extension)
8 7 1
Extension Number
you want to cancel MW
? ? ?
3
Clear all Message Waiting (at any extension)
8 7
Clear all messages (you have left for other extensions and messages other extension have left for you).
(
When Cam
p
On
)
8 07
Cancel Camp On / Callback
Answering Calls
Answering an Outside / Intercom Call
Each incoming call can have specified ringing pattern respectively. Ask your Supplier.
(
Rin
g
in
g)
3 4