TO PLACE A CALL ON
REMOTE HOLD
TO INITIATE
While in conversation with Station/Trunk
Party:
◆ Press the TRANSFER key. Receive interrupted
dial tone.
◆ Dial destination station’s extension.
◆ Receive ring back tone.
◆ Press the Hold key. (Call is placed on hold at
the destination station’s extension).
◆ Hang up.
TO RETRIEVE AT DESTINATION
◆ Lift handset or press Speaker.
◆ Press line on hold. Use handset to converse.
NOTE: Any station with the destination line
appearance can retrieve the call.
TO RETRIEVE FROM PHONE WITHOUT
DESTINATION LINE APPEARANCE
◆ Lift handset or press Speaker.
◆ Dial Access Code for Direct Call Pick-Up.
◆ Dial destination station’s extension.
◆ Use handset to converse.
20
NEC-403 DtermSeries i UG Insid6 1/23/03 12:31 PM Page 20