Filter
Top Products
5302 IP Phone User Guide
10
Phone Status: Audio/Visual Feedback
The status of the 5302 phone is provided by the LEDs and tones played either through the handset or
speaker.
LED Feedback
LED Off On (Solid) Blinking slowly Blinking quickly
Message /
Ringing
No voice
messages in
your mailbox,
and no
incoming call.
Not Applicable There is an incoming
call. Ringing indication
takes precedence
over voice message
indication.
There is a
newmessage in your
voicemail box.
Line 1 Line 1 is idle. There is an active call
on Line 1 or Line 1
has been seized to
place an outgoing call.
There is an incoming
call on Line 1.
There is a held call on
Line 1.
Line 2 Line 2 is idle. There is an active call
on Line 2 or Line 2
has been seized to
place an outgoing call.
There is an incoming
call on Line 2.
There is a held call on
Line 2.
Tone Feedback
Tone Name Is heard when…
Error tone you press a programmable key that has not been configured by your System
Administrator
Busy tone a called party is busy.
Re-Order tone an incorrect number has been dialed..
Ring-back tone a called party is ringing.
Ring tone there is an incoming call
Paging tone a page is received.
TM
, ® Trademark of Mitel Networks Corporation.
© Copyright 2007, Mitel Networks Corporation.
All rights reserved.