Filter
Top Products
Installation
Wall-Mounting the Base
8 ◆ Chapter 1: Installation DSX Cordless Lite II Telephone User Guide
Mounting the Base to a Wall Plate
To mount the base on a standard wall plate (Figure 6: Mounting the Base to a Standard Wall Plate):
1. Snap the base onto the wall-mount bracket.
- Make sure the mounting ears fit all the way into their slots and the mounting tabs snap into place.
2. Run a customer-provided short line cord in the wide wire channel as shown and plug it into the base.
3. Run the AC adaptor cord in the narrow wire channel as shown and plug it into the base.
4. Plug the other end of the short line cord into the wall plate modular jack.
5. Slide the wall-mount bracket onto the wall plate.
Figure 6: Mounting the Base to a Standard Wall Plate
To remove the base from the wall:
1. Slide the wall-mount bracket off of the wall plate.
2. Unplug the short line cord from the wall plate.
3. Unplug the short line cord and AC adaptor cord from the base.
4. Press the mounting tabs to release the wall-mount bracket from the base.
Wall
Wall Plate
AC adaptor cord
in narrow channel
Mounting tab
Line cord
in wide
channel
Mounting ear
1093092 - 6
(Optional) Line out to
DSX Keyset