M&S Systems MC30 Telephone User Manual


 
7
Hand Held RF Remote
Control
Note: When the MC302 is installed
with the MCD6 6-disc CD
player, the UP/DOWN buttons
will change the track selection.
This track function operates
when CD is selected as the
source.
OPERATION - Your HAND HELD REMOTE CONTROL is an RF (radio frequency)
device. This means that it will work anywhere in or around your house (you do not
have to be in the same room as the master). The system also has a unique code in the
transmitter that is learned by the MC302, virtually ensuring that no one else can
interfere with your system and you will not interfere with anyone else.
SOURCE button - This button is used to select
1
the audio source (FM, AM, AUX or TAPE
inputs) which the MC302 will output to the
Music Speakers. Each time the SOURCE
button is momentarily pressed, the audio
source changes. The sequence is FM, AM,
AUX, TAPE, and back to FM.
TUNING UP/DOWN buttons - To go to the
2
next preset station, simply press the UP button
momentarily. The MC302 will tune in the next
station from the last stationed tuned.
3
VOLUME UP[ON]/DOWN[OFF] button - These
buttons are used to change the system music
volume. Pressing the VOLUME DOWN button reduces the volume. The MC302 will
turn off when the volume reaches zero. Pressing the VOLUME UP button turns the
MC302 ON if it is OFF.
8
N65RS room station
N34M room station
Note: When the MC302 is installed
with the MCD6 6-disc player, the
scan function will change the track
selection. This track function
operates when CD is selected as
the source.
ROOM STATION FEATURES
Speaker - This speaker provides music and
A
intercom output. This speaker also serves as
the intercom microphone.
VOLUME knob - This control is used to adjust
B
the output level of both the intercom and music.
Note: It is recommended to keep this control
set at maximum (clockwise) for optimum
performance.
UP/ON - DOWN/OFF buttons (N65RS only) -
C
These buttons are used to increase or
decrease the system music volume. These
buttons can also be used to turn the MC302
ON and OFF. These buttons also provide
radio preset tuning and source select functions.
Momentarily pressing both the MUSIC
VOLUME UP and DOWN buttons at the same
time will perform a scan function which will step
through the radio presets. Once all presets
have been scanned, the radio station band
and/or music source will change.
ROOM LISTEN button (N65/N65RS) - This
D
button is used for listening to the other rooms
and the master. To listen to other rooms and
the master hold the ROOM LISTEN button in.
Release the ROOM LISTEN button when you
are finished listening. NOTE: This feature is not available at the N34M station.
ROOM TALK button - This button is used for talking to the other rooms and to
E
the master. To talk to other rooms and the master hold the ROOM TALK button
in while talking in the direction of the speaker. Release the ROOM TALK button
when you are finished talking.
MONITOR button (N34Monly) - This button when pressed allows the roomF
station to be used as a monitor input. This feature allows for easy continuous
monitoring of an infant or those requiring special care.