Mitel OpenPhone 27 Telephone User Manual


 
Page 7
Getting Started
Powering the OP27 Phone On / Off
To power on:
Press
while in the standby (Off) mode.
To power off:
While in idle mode, press
for at least 2 seconds.
About the Display Indicators
The OP27 phone provides visual indicators for the following features and functions:
Icon Description
*
Handset is operating in Resilient mode.
Handset mode is enabled. When you obtain dial tone, the icon appears
on the display.
Indicates the strength of the radio signal in use by your handset (four
levels).
Indicates the battery charge level (five levels).
(Flashing)
Battery is empty. You will hear a battery-low warning alarm (3 beeps) in idle
state or conversation state once every minute. When you hear the warning
alarm, you have approximately 3 minutes left before the handset will shut
down.
;
Loud speaker mode is enabled; when you obtain dial tone, the ; icon
appears on the display and the loudspeaker key turns on.
Ringer is disabled.
Keypad is locked. Press and then press # to unlock the keypad.
Alarm reminder is set.