Filter
Top Products
13-4940-00251 Commend SIP Doorphone
8
Multiline IP Set Configuration
On the Mitel 3300 ICP, a SIP device can be programmed either in the User Configuration
form or the Multiline IP Set Configuration form and are programmed as a “Generic SIP
Phone”. Enterprise Manager can also be used to provision where this application is
installed.
The User PIN is the SIP authentication password and the Number is the Directory
Number (DN is a telephone number). The Number and User PIN must match the
information in the Commend doorphone’s settings. All other field names should be
programmed according to the site requirements or left at default. See an example in
Figure 2.
Figure 2 – Multiline IP Set Configuration