Filter
Top Products
-52-
FAILOVER MODE
Make A Call
To make a call using the Line Interface Module line during an IP
connection failure:
1. Lift the handset. IP FAIL: ANALOG CALL appears on the display.
2. Dial the number to make the call.
Answer A Call
To answer a call using the Line Interface Module line during an IP
connection failure:
z
Lift the handset. IP FAIL: ANALOG CALL appears on the display, and the
call is answered.
EMERGENCY CALLS
WARNING FOR EMERGENCY NUMBER DIALING: Consult your local
authorities for Emer
g
ency Numbers and 911 or equivalent service availability
in your area. Emergency Number dialing should only be performed by
picking up the handset and selecting the Line Interface Module key. If
Privacy Mode is enabled and the Line Interface Module key local line is busy,
dialing will not occur on the Line Interface Module line. Emergency dialing
using an IP connection may not be supported due to ICP system
configuration and country location. For more information, contact your
System Administrator. You can make an Emergency Call to your Local
Emergency Service using the Line Interface Module line when the IP
connection has failed.
To make an Emergency Call using the Line Interface Module line:
1. Lift the handset.
2. Press the Line Interface Module key.
3. Dial your Local Emergency Number. ANALOG CALL appears on the
display.