Filter
Top Products
-48-
Night Answer
Office telephone systems are often placed into Night Answer after regular
hours. Calls then ring alternate answer points—either designated extensions
or a night bell. You can dial the Trunk Answer From Any Station (TAFAS)
code to answer calls ringing the night bell. If permitted by system
programming, you can put your phone into one of two night answer modes,
Night1 or Night2.
To switch your 5212 IP Phone to Night Answer or back to Day service:
1. Lift the handset.
2. Press the Night Answer feature key. (See "Feature Key" for instructions
on programming a feature key.)
3. Do one of the following:
Press 0 for Day Service.
Press 1 for Night1.
Press 2 for Night2.
4. Hang up.
The Night Answer feature key light flashes slowly for Night1, and rapidly
for Night2. The Night Answer feature key light is off for when your phone
is in Day service.
To switch your 5224 IP Phone to Night Answer or Day service, or to
view which service your 5224 IP Phone is currently in:
1. Press ( SUPERKEY ).
2. Press the No softkey until *quot;Night Answer?" appears.
3. Press the Yes softkey.
4. Do one of the following:
To exit without making any changes, press (SUPERKEY).
To change the mode of service, press the Change softkey, followed
by No until the desired alternative appears, and then press Yes.