Filter
Top Products
-2-
Telephone Status Indicators
Line Keys
The bottom-right programmable feature key on your phone will be
programmed by your Administrator as a LINE key (referred to as either an
'intercom' or 'Prime Line' key). Additional programmable keys can be set up
to access other lines so that you can answer or make calls on multiple lines.
Programmable keys designated as LINE keys will indicate the status of a
line with the key light as follows:
To make a call using a line other than the primary one assigned to the
p
hone:
1. Lift the handset.
2. Press a line key that has been programmed to use another extension.
3. Dial the number.
Note: Refer to Making and Answering Calls for further information.
For Users on Resilient 3300 ICP Systems
If durin
g
a call, you hear two beeps repeated every 20 seconds it means that
your phone is switching to a secondary 3300 ICP system. The call continues
but the keys and features on your phone stop working. The keys and most
features begin working again after you hang up. Normal operation resumes
when your phone switches back to the primary system. If your phone is idle
and switched to the secondary system, you'll see a flashing rectangle on the
display. The rectangle remains until the switch to the primary system is
complete.
Situation: The message waiting indicator is:
Line is idle Off
Line is ringing Flashing rapidly
Message waiting/Voicemail Flashing slowly
Key Status Explanation
Lit The line is in use.
Unlit The line is idle (or free).
Flashing with ringing cadence. An external call is ringing on this line.
Flashing with held cadence. A call on this line is currently on hold.