Filter
Top Products
-2-
Telephone Status Indicators
Designation Card
Use the designation card to write frequently called numbers of feature
access codes.
Note: Your designation card should show "Trans/Conf" at the bottom right
of the card. If it does not, get the correct designation card from your
administrator.
To remove the designation card cover
z
Press the tab at the top of the cover downwards, and lift the cover.
To replace the designation card cover
z
Insert the the cover in the slots ri
g
ht above the function keys, then press
the tab at the top of the cover into place.
About Feature Access Codes
Use of some features requires dialing access codes. The codes are flexible
and may be different than those in this guide. Ask your administrator for a
list of codes you should use.
For Users on Resilient 3300 ICP Systems
If durin
g
a call, you hear two beeps repeated every 20 seconds it means that
your phone is switching to a secondary 3300 ICP system. The call continues
but the keys and features on your phone stop working. The keys and most
features begin working again after you hang up. Normal operation resumes
when your phone switches back to the primary system.
Situation: The message waiting indicator is:
Line is idle Off
Line is ringing Flashing rapidly
Message waiting/Voice mail Flashing slowly