Filter
Top Products
User Guide
- 5 -
Adjusting Volume Levels
Ringer Control
To adjust the Ringer Volume while the set is ringing:
• Press
to increase the volume.
• Press
to decrease the volume.
Handset Receiver Volume Control
To adjust the Handset Receiver Volume when you are using the handset:
• Press
to increase the volume.
• Press
to decrease the volume.
Mounting The Phone On The Wall
Mounting On The Wall Using Screws (UK/Europe)
The 5001 IP phone can be mounted directly on a wall using mounting screws:
1. Select a location away from electrical cables, pipes or other items behind
the mounting location that could cause a hazard when inserting screws in
the wall.
CAUTION: Make sure the wall material is capable of
supporting the weight of the unit. For additional security, it
is recommended that you mount the phone on a plywood
backboard. Mitel Networks is not responsible for units
damaged as a result of improper wall mounting.
2. Insert two mounting screws 3 5/16 inches (8.4 cm) apart as illustrated to
the right. Allow about 3/16 of an inch (0.5 cm) between the wall and screw
heads for mounting the phone.
3. Use #10 screws 1 to 1.5 inches (2.5 to 4 cm) in length for mounting screws
and anchoring devices suitable for the wall material on which the unit will
be mounted.
4. Align the mounting slots on the back of the phone with the heads of the
screws and push until the unit is firmly seated
Mounting On The Wall Using A Bracket (North America)
The 5001 IP phone can be mounted directly on a wall using a standard telephone wall mount bracket
available from your telephone equipment dealer.
Simply align the mounting slots on the back of the phone with the posts on the bracket and push until
the unit is firmly seated.