Filter
Top Products
-44-
Night/Day Service Switching
Office telephone systems are often placed into Night Service after regular
hours. Calls then ring alternate answer points--either designated extensions
or a night bell. Extension users can dial the Trunk Answer From Any Station
(TAFAS) code to answer calls ringing the night bell.
If permitted by system programming, you can put the system into Day
service or one of two night service modes, Night1 or Night2.
To switch between Night and Day Service:
!
Press the NIGHT/DAY feature key. (See "Feature Key" for instructions on
programming a feature key.)
In Night1 service, the light in the NIGHT/DAY feature key flashes slowly.
In Night2 service it flashes rapidly. In Day service, the light is is off.