Filter
Top Products
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an
“oF” icon appears. Select “on” by pressing the buttons and push
the PTT key, or press MENU button to move to the next feature
setting.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an
“on” icon appears. Select “oF” by pressing the buttons and push
the PTT key, or press MENU button to move to the next feature
setting.
CALL
ALERT SELECTION
Your GXT1000 Series has 10 selectable CALL ALERTS (15 for
GXT105050). To select, press the MENU button until a “CA” icon
appears and to the right of the “CA” icon the current CALL ALERT
setting is displayed. Then press the buttons to make the CALL
ALERT selections, the radio will emit a corresponding tone for each
selection. To confirm, press the PTT button or press MENU button to
move to the next feature setting.
Note : GXT1050 has 5 additional “Animal Sound” CALL Alerts -
Cougar, Duck, Crow, Wolf, Turkey.
VIBRA
TE ALERT
To turn the VIBRATE ALERT on, press the MENU button until the
display will show the VIBRATE ALERT icon blinking, while on the right
of the CHANNEL NUMBER, an “oF” icon appears. Select “on” by
pressing the buttons and push the PTT button, or press MENU
button. The VIBRATE ALERT icon will remain on the display.
To turn the VIBRATE ALERT off, press the MENU button until the
display will show the VIBRATE ALERT icon blinking, while on the right
of the CHANNEL NUMBER, an “on” icon appears. Select “oF” by
pressing the buttons and push the PTT button, or press MENU
button. The VIBRATE ALERT icon will go off.
Page 16 www.midlandradio.com
Model GXT1000/1050 Series
/
/
/
/
/