Filter
Top Products
Page 10 www.midlandradio.com
GXT1
000/1050 SERIES QUICK REFERENCE CHART
MONITOR
Pressing and holding the MONITOR button for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out
of MONITOR mode.
SCAN
Your GXT1000/1050 Series can scan all 50 channels for activity. To
enter, quickly press the SCAN button. Repeat the same procedure to
exit. Your radio will rapidly scan each of the 50 channels and stop on
any active channel. Your radio will resume scanning after 4 seconds
when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel for 10
seconds before resuming scan when PTT button is no longer pressed.
To resume scanning, quickly press the button.
CALL
ALER
T
Your GXT1000/1050 Series can transmit a call alert for a fixed length
of time. To send a call alert, press the CALL button. The TX icon will
appear while transmitting a call alert and a tone can be heard on the
speaker for confirmation.
The GXT900 has 10 call alert selections while the GXT950 has 15 call
alerts including 5 “animal sound” call alerts - Cougar, Duck, Crow,
Wolf, Turkey.
Model GXT1000/1050 Series
MENU
Channel
eVOX
1~50
Privacy
Roger Beep
On/Off
Call Tone
1~10
Vibrate
On/Off
WX Channel
1~10
Silent Operation
On/Off
oF~9
Off
CTCSS
DCS
1~38
1~104
WX Alert
On/Off
Group Mode On
Off
ID Setting
Ring Tone
0~5
Group Code
0~142
Caller ID
4 digit code (0~9),
Press MON to
choose each digit
1~10
1~15 for GXT1050
Power
H/M/L
MENU
Press and hold the
MENU button for
5 seconds
WX Scan
1~10
*** Only on Ch 1 ~ 22
Dual Watch
Channel
1~50
Off CTCSS
DCS
1~38
1~104
*** Only on Ch 1 ~ 22
DUAL WATCH FUNCTION
Dual Watch
Privacy
Whisper
On/Off
Press and hold
the DOWN
button for 5
seconds
SOS
/