Filter
Top Products
To enter the PROGRAM mode, start with the radio powered off and press and
hold the SCAN button and PTT button simultaneously while you power the
radio on; done by pressing the MODE button for 3 seconds. The radio will
beep and display all the LCD segments for a few seconds. The Program icon
(shown by PROG) icon will appear, the channel number flashes, and the
Frequency icon (shown by FREQ) and Privacy Code icon (shown by CODE)
will be displayed alternately.
To exit PROGRAM mode, press the MODE button for 3 seconds then the unit
will power off.
Setting the
Channel
Setting the
Frequency
Setting the
Privacy Code
Setting the
SCAN List
- Press the S or T button.
- Press the button until FREQ
appears.
- Press the S or T button to change
the frequency.
MODE
- Press the button until CODE
appears.
- Press the S or T button to change
the Privacy Code.
MODE
- Press the button until “y”
appears.
- Press the S or T button to select
between “y” or “n”.
- Selecting “y” will include the channel
during scanning.
- Selecting “n” will exclude the channel
during scanning.
MODE
BLUE STAR by MIDLAND
BR777 PROGRAMMING QUICK REFERENCE GUIDE